 FLEX HEX FOR CONNECTING SQUARED END FLEX CABLE
to threaded motor output shaft |
| OCFH146Q |
1/4-28 to .187 squared end
cable |
9.95 |
| OCFHKB6Q |
K & B .21 - .67 to .187
squared end cable |
9.95 |
| OCFHO6S6Q |
OPS 65 & 80 (6mm) to .187
squared end cable |
9.95 |
24"PRECUT CABLE LENGTHS WITH ONE SQUARED END
(Please specify A-for cable only, B-for cable with teflon tubing, or C-cable with
teflon tubing and ferrule.) |
| OC6SQL-24 |
.187 dia left (standard) lay |
(A) 5.95
(B) 8.85
(C) 11.65 |
| OC6SQR-24 |
.187 dia. right lay |
(A) 5.95
(B) 8.85
(C) 11.65 |
| OC8SQL-24 |
.250 dia. left (standard) lay |
(A) 6.95
(B) 10.55
(C) 13.35 |
| OC8SQR-24 |
.250 dia. right lay |
(A) 6.95
(B) 10.55
(C) 13.35 |
18" PRECUT CABLE LENGTHS WITH ONE SQUARED END |
| OCSSQL-18 |
.250 dia.,left (standard) lay |
5.95 |
36"PRECUT CABLE LENGTHS WITH BOTH ENDS SQUARED
ideal if the boater needs a .250 squared end cable longer than 24", also great for
the boater who needs less than 18" in length - now they can get two out of one |
| OC8SQL-36 |
.250 dia.,left (standard) lay |
10.95 |
24" PRECUT CABLE LENGTHS
available with matching teflon tubing, and separate stub shaft (Please specify A, B, or
C when ordering) |
| OC098L-24 |
.098 dia. left (standard) lay |
1.65
3.00
(OC4PS) 5.50 |
| OC098R-24 |
.098 dia. right lay |
1.65
3.00
(OC4PS) 5.50 |
| OC13OL-24 |
.130 dia. left (standard) lay |
1.70
3.90
(OC6130PS) 6.80 |
| OC13OR-24 |
.130 dia. right lay |
1.70
3.90
(OC6130PS) 6.80 |
| OC1SOL-24 |
.150 dia. left (standard) lay |
1.90
4.50
(OC6150PS) 7.40 |
| OC15OR-24 |
.150 dia. right lay |
1.90
4.50
(OC6150PS) 7.40 |
| OC187L-24 |
.187 dia. left (standard) lay |
2.90
5.80
(OCFSF1818) 8.60 |
| OC187R-24 |
.187 dia. right lay |
2.90
5.80
(OCFSF1818) 8.60 |
| OC25OL-24 |
.250 dia. left (standard) lay |
7.90
11.50
(OCFSF2518) 14.30 |
| OC25OR-24 |
.250 dia. right lay |
7.90
11.50
(OCFSF2518) 14.30 |
24" PRECUT TEFLON TUBING |
| OC098T-24 |
24" teflon tubing for .098
cable |
1.40 |
| OC130T-24 |
24" teflon tubing for .130
cable |
2.20 |
| OC150T-24 |
24" teflon tubing for .150
cable |
2.60 |
| OC187T-24 |
24" teflon tubing for .187
cable |
2.90 |
| OC250T-24 |
24" teflon tubing for .250
cable |
3.60 |
BULK FLEXIBLE CABLE AND FLEXIBLE TEFLON TUBING IN 20'
PACKAGES
FLEXIBLE CABLE
NOTE : ALL SIZES OF FLEX CABLE are available in standard left lay,or
in right lay, left lay will be shipped unless otherwise specified. |
| OC098L-240 |
(20' x .098) |
14.85 |
| OC130L-240 |
(20' x .130) |
15.30 |
| OC150L-240 |
(20' x .150) |
17.10 |
| OC187L-240 |
(20' x .187) |
26.10 |
| OC250L-240 |
(20' x .250) |
71.10 |
TEFLON TUBING
NOTE : when ordering Teflon tubing, remember, the .098
Teflon
tubing is for the .098 cable, the .130 tubing is for the .130 cable, etc. |
| OC098T-240 |
(20' x .098) |
12.60 |
| OC130T-240 |
(20' x .130) |
19.80 |
| OC150T-240 |
(20' x .150) |
23.40 |
| OC187T-240 |
(20' x .187) |
26.10 |
| OC250T-240 |
(20' x .250) |
32.40 |
|
FLEX
FERRULE - FOR CONNECTING FLEXIBLE SHAFT TO PROPELLER SHAFT (IN BRASS) |
| OCFSF2518 |
7/16" O.D., .250 DIAMETER FLEXIBLE
CABLE TO .187 SHAFT |
2.95 |
| OCFSF2525 |
7/16" O.D., .250 DIAMETER FLEXIBLE
CABLE TO .250 SHAFT |
2.95 |
| OCFSF1818 |
7/16" O.D., .187 DIAMETER FLEXIBLE
CABLE TO .187 SHAFT |
2.95 |
| OCFSF616 |
3/8" O.D., .187 DIAMETER FLEXIBLE
CABLE TO .187 SHAFT
(The above OCFSF616 ferrule matches the smaller boss on the SU Strut blade or the
OC6SB40 strut blade) |
2.7 |
| OCFSF916 |
9/16" O.D., .250 DIAMETER FLEXIBLE
CABLE TO .250 SHAFT
(The above OCFSF916 ferrule is to be used with the OC8SBE strut blade to match the
outside diameter on the boss of that strut blade) |
3.50 |
OCFH FLEX HEX - FOR
COUPLING FLEXIBLE SHAFT TO THREADED ENGINE CRANKSHAFT
Do not use with squared end flex cable. ( DO NOT USE WITH SOLID DRIVE SHAFTS. If using
a solid drive shaft - see universals on page 22) |
| PN |
Fits Engine |
Cable Size |
|
| OCFHR6518 |
ROSSI 65 & 80 8mm with pilot |
.187 |
7.95 |
| OCFHR6525 |
ROSSI 65 & 80 8mm with pilot |
.250 |
7.95 |
| OCFHR9018 |
ROSSI 90 5mm with pilot |
.187 |
9.95 |
| OCFHR9025 |
ROSSI 90 - 8mm with pilot |
.250 |
9.95 |
| OCFHO4518 |
OPS 45 1/4-28 with pilot |
.187 |
7.95 |
| OCFHO4525 |
OPS 45 1/4-28 with pilot |
.250 |
8.95 |
| OCFHO6518 |
OPS 65 & 80 - 6mm with pilot |
.187 |
7.95 |
| OCFHO6525 |
OPS 65 & 80 6mm with pilot |
.250 |
8.95 |
| OCFHO9018 |
OPS 90 10mm with pilot |
.187 |
9.95 |
| OCFHO9025 |
OPS 90 10mm with pilot |
.250 |
9.95 |
| OCFHP4518 |
PICCO 45 1/4-28 with pilot |
.187 |
7.95 |
| OCFHP6518 |
PICCO 65 & 80 & 90 8mm with
pilot |
.187 |
7.95 |
| OCFHP6525 |
PICCO 65 & 80 & 90 - 8mm
with pilot |
.250 |
7.95 |
| OCFHKB15 |
K & B .21 - .67 1/4-28 with
pilot |
.150 |
7.95 |
| OCFHKB18 |
K & B .21 - .67 1/4-28 with
pilot |
.187 |
7.95 |
| OCFHKB25 |
K & B .21 - .67 1/4-28 with
pilot |
.250 |
8.95 |
| OCFHOS46 |
OS 46 1/4-28 with pilot |
.187 |
7.95 |
| OCFH5MMO9 |
5MM |
.098 |
7.95 |
| OCFH5MM13 |
5MM |
.130 |
7.95 |
| OCFH5MM15 |
5MM |
.150 |
7.95 |
| OCFH6MM15 |
6MM |
.150 |
7.95 |
| OCFH6MM18 |
6MM |
.187 |
7.95 |
| OCFH6MM25 |
6MM |
.250 |
8.95 |
| OCFH7MM15 |
7MM |
.150 |
7.95 |
| OCFH7MM18 |
7MM |
.187 |
7.95 |
| OCFH8MM18 |
8MM |
.187 |
7.95 |
| OCFH8MM25 |
8MM |
.250 |
7.95 |
| OCFH10313 |
10/32 |
.130 |
5.95 |
| OCFH10315 |
10/32 |
.150 |
5.95 |
| OCFH1413 |
1/4-28 |
.130 |
7.95 |
| OCFH1415 |
1/4-28 |
.150 |
7.95 |
| OCFH1418 |
1/4-28 |
.187 |
7.95 |
| OCFH1425 |
1/4-28 |
.250 |
8.95 |
| OCFH51615 |
5/16-24 |
.150 |
7.95 |
| OCFH51618 |
5/16-24 |
.187 |
7.95 |
| OCFH51625 |
5/16-24 |
.250 |
7.95 |
| NOTE :with pilot means
there is a shoulder or hub that fits inside the flywheel on that specific engine for the
most thread contact. |
OCFHE FLEX HEX FOR COUPLING
FLEXIBLE SHAFT TO ELECTRIC MOTOR OUTPUT SHAFT, smooth bore with set screw at motor end |
| PN |
Fits Engine |
Cable
Size |
|
| OCFHE18-098 |
1/8" SMOOTH |
.098 |
7.50 |
| OCFHE532-098 |
5/32" SMOOTH |
.098 |
7.50 |
| OCFHE316-130 |
3/16" SMOOTH |
.130 |
7.50 |
| OCFHE316-150 |
3/16" SMOOTH |
.150 |
7.50 |
| OCFHE5MM-130 |
5MM SMOOTH |
.130 |
7.50 |
| OCFHE5MM-150 |
5MM SMOOTH |
.150 |
7.50 |
MOTOR
MOUNTS |
| OCOB35 |
OUTBOARD MOTOR MOUNT -
adjustable motor mount for outboard motor extruded aluminum one piece base, cast aluminum
pivot bracket with two sleeve bearings installed for the 3/16" -pivot shaft (that
comes with the motor) to pivot on |
18.95 |
| OCOB75 |
OUTBOARD MOTOR MOUNT -
adjustable motor mount design to fit 7.5 or larger outboard motor. Extruded aluminum one
piece base (mounting holes spacing matches stock mounting holes-which means if the motor
was alread 1installed-and the adjustable mount is being added no new holes have to be
drilled)- calt beryllium pivot bra-cket will accommodate the 1/4"pivot shaft |
18.95 |
| OCOB35 I/0 |
3.5 adjustable outboard motor
mount pivot bracket only cast in aluminum with sleeve bearings installed |
11.95 |
| OCOB75 I/0 |
7.5 or larger adjustable
outboard motor mount pivot bracket only - cast in beryllium copper |
11.95 |
| (all inboard motor
mounts are extruded aluminum) |
| PN |
Width |
Engine Size |
Type |
|
| 3-30 |
3" |
1-.75 |
V TYPE MOUNT |
5.95 |
| 4-40 |
4" |
3.5 - 7.5 |
V TYPE MOUNT |
7.95 |
| 4-50 |
4" |
3.5 - 7.5 |
V TYPE MOUNT |
8.25 |
| 4-65 |
4" |
.65 - .80 |
V TYPE MOUNT |
8.50 |
| TWIN 20 |
4" |
3.5 ONLY |
FLAT TYPE MOUNT |
12.40 |
| IV-45 3.5 HUMM-DINGER |
4" |
3.5 ONLY |
VIBRATION ABSORPTION |
39.95 |
| IV-45 7.5 HUMM-DINGER |
4" |
3.5 - 7.5 |
VIBRATION ABSORPTION |
39.95 |
| IV-45 HUMM-DINGER |
4" |
7.5 - 11 |
VIBRATION ABSORPTION |
39.95 |
| 60 MULTI |
5" |
7.5 - 10 |
FLAT TYPE MOUNT |
7.45 |
| OMNI |
5" |
7.5 - 10 |
SAME AS ABOVE MINUS END FLANGES |
5.95 |
| 5-55 |
5" |
7.5 - 10 |
V TYPE MOUNT |
8.75 |
| 5-60 |
5" |
7.5 - 10 |
FOR OUTRIGGER HULLS |
9.00 |
| 5-65 |
5" |
7.5 - 11 |
V TYPE MOUNT |
9.00 |
| 5-90 |
5" |
11 - 15 |
V TYPE MOUNT |
16.25 |
| SWIFT SWITCH |
5" |
7.5 - 11 |
V TYPE MOUNT (COMPLETE : BASE/INSERT) |
17.95 |
| V65 7.5 HUMM-DINGER |
5" |
7.5 ONLY |
VIBRATION ABSORPTION |
39.95 |
| V65 HUMM-DINGER |
5" |
7.5 - 11 |
VIBRATION ABSORPTION |
39.95 |
| V90 HUMM-DINGER |
5" |
11 - 15 |
VIBRATION ABSORPTION |
46.95 |
| VI-90 HUMM-DINGER |
6" |
11 - 15 |
VIBRATION ABSORPTION |
46.95 |
| 6-90 |
6" |
11 - 15 |
V TYPE MOUNT |
17.95 |
| TWIN 60 |
6" |
7.5 - 11 |
FLAT TYPE MOUNT |
20.95 |
SIDE MOUNTING PADS MACHINED AND HOLES
DRILLED. MOTOR MOUNTING PADS UNDRILLED AND UNTAPPED.
4 MOTOR MOUNTING SCREWS INCLUDED WITH ALL MOUNTS.
OPENED DRILLED AND TAPPED MOTOR MOUNTS
HUMMDINGER MOTOR MOUNTS |
| PN |
Width |
Engine |
|
| IV-45 P45 |
4" |
OPENED,DRILLED & TAPPED FOR PICCO .45 |
41.95 |
| IV-45 K21 |
4" |
OPENED,DRILLED & TAPPED FOR K & B
.21 |
41.95 |
| IV-45 K45 |
4" |
OPENED,DRILLED & TAPPED FOR K & B
.45 |
41.95 |
| IV-45 K65 |
4" |
OPENED,DRILLED & TAPPED FOR K & B
.67/.82 |
41.95 |
| V-65 P45 |
5" |
OPENED,DRILLED & TAPPED FOR PICCO .45 |
41.95 |
| V-65 K45 |
5" |
OPENED,DRILLED & TAPPED FOR K & B
.45 |
41.95 |
| V-65 K65 |
5" |
OPENED,DRILLED & TAPPED FOR K & B
.67/.82 |
41.95 |
TWIN 60 MOTOR MOUNTS (8 motor mounting screws included) |
| PN |
Width |
Engine |
|
| T60 P45 |
6" |
OPENED DRILLED & TAPPED FOR
TWO PICCO .45 |
24.00 |
| T60 065 |
6" |
OPENED DRILLED & TAPPED TO
FIT EITHER TWO OPS .65'S OR TWO PICCO .65'S |
24.00 |
MOTOR MOUNT PARTS ORDERED SEPARATELY |
| SWIFT |
SWITCH BASE ONLY |
12.00 |
| SWIFT |
SWITCH INSERT ONLY (used in swift switch
mount or V-65) |
6.95 |
| V-65 I/O 7.5 |
INSERT ONLY (opened for K & B 7.5 or
similar crank case size) |
6.95 |
| V-65 I/O K45 |
INSERT ONLY (opened, drilled and tapped for
K & B 7.5) |
9.25 |
| V-65 I/O P45 |
INSERT ONLY (opened, drilled and tapped for
PICCO 7.5) |
9.25 |
| V-65 I/O K65 |
INSERT ONLY (opened, drilled and tapped for
K & B .67/.82) |
9.25 |
| IV-45 I/O |
INSERT ONLY (used in standard IV-45
hummdinger) |
6.95 |
| IV-45 I/O 3.5 |
INSERT ONLY (opened for K & B 3.5 or
similar crank case size) |
6.95 |
| IV-45 I/O K21 |
INSERT ONLY (opened, drilled and tapped for
K & B 3.5) |
9.25 |
| IV-45 I/O 7.5 |
INSERT ONLY (opened for K & B 7.5 or
similar crankcase size) |
6.95 |
| IV-45 I/O K45 |
INSERT ONLY (opened, drilled and tapped for
K & B 7.5) |
9.25 |
| IV-45 I/O P45 |
INSERT ONLY (opened, drilled and tapped for
PICCO 7.5) |
9.25 |
| IV-45 I/O K65 |
INSERT ONLY (opened, drilled and tapped for
K & B .67/.82) |
9.25 |
| V-90 / VI-90 |
INSERT ONLY |
15.00 |
| REPLACEMENT SMALL RUBBER BUSHINGS FOR IV45
MOUNT |
(1/2"x1/2" with 8-32 female
threads) set of 4) |
1.95 |
| B D REPLACEMENT LARGE RUBBER BUSHINGS FOR
V-90 & V-65 MOUNTS |
(5/8"x5/8" with 1/4-20 male and
female threads )(set of 4) |
14.95 |
SCREWS / NUTS / BOLTS |
| SS4402 |
4-40 SET SCREWS (2 per package)
|
.25 |
| SS4409 |
4-40 SET SCREWS (9 per package)
|
1.00 |
| SS6322 |
6-32 SOCKET HEAD SET SCREWS (2
per package) |
.25 |
| SS6329 |
6-32 SOCKET HEAD SET SCREWS (9
per package) |
1.0 |
| SS8322 |
8-32 SOCKET HEAD SET SCREWS (2
per package) |
.2L |
| SS8329 |
8-32 SOCKET HEAD SET SCREWS (9
per package) |
1.00 |
| SS10322 |
10-32 SOCKET HEAD SET SCREWS (2
per package) |
.25 |
| SS10329 |
10 32 SOCKET HEAD SET SCREWS (9
per package) |
1.00 |
|
6-32 T NUTS & BOLTS (SET OF
4) |
1.00 |
|
8-32 T NUTS & BOLTS (SET OF
4) |
1.10 |
|
10-32 T NUTS & BOLTS (SET
OF 4) |
1.20 |
|
8-32 BUTTON HEAD BOLTS (SET OF
4) |
1.00 |
|
10-32 BUTTON HEAD BOLTS (SET OF
4) |
1.00 |
|
6-32 BREAKAWAY NYLON BOLTS (SET
OF 4) |
.50 |
|
8-32 BREAKAWAY NYLON BOLTS (SET
OF 4) |
.50 |
|
10-32 BREAKAWAY NYLON BOLTS
(SET OF 4) |
.50 |
HEX
WRENCHES |
| EW4SS |
HEX WRENCH FOR 4/40 SET SCREW
(as used in the OC4D or OC6DMM drive
dogs) |
.30 |
| HW6SS |
HEX WRENCH FOR 6/32 SET SCREW |
.30 |
| HW6B |
HEX WRENCH FOR 6/32 BOLT |
.30 |
| HW8SS |
HEX WRENCH FOR 8/32 SET SCREW |
.30 |
| EW8B |
HEX WRENCH FOR 8/32 BOLT |
.30 |
| HW1OSS |
HEX WRENCH FOR 10/32 SET SCREW |
.30 |
| HW1OB |
HEX WRENCH FOR 10/32 BOLT |
.30 |
| HWALL |
ONE OF EACH ABOVE HEX WRENCHES
(SET OF 7) |
2.00 |
WATER PICK-UPS & OUTLETS |
| #71 |
WATER SCOOP, brass, adjustable
depth, plus outlet (SEE ILLUSTRATION) |
2.75 |
| #71-0 |
WATER OUTLET, brass (SEE
ILLUSTRATION) |
1.40 |
| OCSW |
STREAMLINED WATER PICK-UP,
brass (SEE ILLUSTRATION) |
3.50 |
| OCSWP |
STREAMLINED WATER PICK-UP PLUS
OUTLET (71-0), brass |
4.75 |
| SMWP |
STERN MOUNT WATER PICKUP,
beryllium copper (SEE ILLUSTRATION) |
11.21 |
STARTER
BELTS |
| LARGE |
(approximately 19"
circumference) |
5.25 |
| MEDIUM |
(approximately 17"
circumference) |
4.25 |
| SMALL |
(approximately 14"
circumference) |
3.75 |
EXHAUST COUPLING
HIGH TEMPERATURE EXHAUST COUPLING, 3" long reinforced high temperature silicone
tubing to connect exhaust to tune pipe |
| OC16HTEC |
1/2" (internal diameter) |
3.50 |
| OC20HTEC |
5/8" (internal diameter) |
3.75 |
| OC24HTEC |
3/4" (internal diameter) |
4.00 |
| OC28HTEC |
7/8" (internal diameter) |
4.25 |
| OC32HTEC |
1" (internal diameter) |
4.50 |
|
SHAFT COLLARS |
| 0C6SC |
SHAFT COLLAR, 3/16" bore,
1/4" long, 7/16" dia. with 8/32 set screw - hardened plated steel |
1.95 |
| 0C6SCD |
SHAFT COLLAR, 3/16" bore,
1/2" long, 7/16" dia. with two 8/32 set screws - hardened plated steel |
1.95 |
| 0C6SSC |
STREAMLINED SHAFT COLLAR,
3/16" bore, 5/8" long, 7/16" dia. w/ 8/32 set screw - hardened plated steel |
1.95 |
| 0C6SSCM |
STREAMLINED SHAFT COLLAR,
3/16" bore, 9/16" long, 3/811 diai w/ 8/32 set screw - hardened plated steel |
1.95 |
| 0C6SSC5 |
STREAMLINED SHAFT COLLAR, 5mm
bore, 5/8" long, 7/1611 dia. w/ 8/32 set screw - hardened plated steel |
1.95 |
|
ADAPTERS |
| OCGCS |
PROP STUB SHAFT (3/16" to
4mm) WITH 0C6DM (drive dog),WASHER AND RETAINING NUT TO REPLACE 4MM shaft in Graupner or
Kyosho Jetstream outdrive to allow installation of any 3/16" bore props 3" long |
4.45 |
| OCGCSL |
PROP STUB SHAFT same as above
but 3 1/4" long for Graupner Hydrospeed or Monster outdrive |
4.45 |
| OCGCSS |
PROP STUB SHAFT same as OCGCS
but 2 3/4" long for Traxxas Villan |
4.45 |
| OC4MM2187 |
PROP ADAPTER slides over a 4mm
prop shaft and lock on with a set screw to allow installation of 3/16" bore props |
4.45 |
| OC64PKG |
PROP SHAFT PACKAGE- this
package is ideal if you are converting a boat set up for geared electric to a .10 or .12
glo engine direct drive. It includes a new 3/16" prop shaft (which fits in our
0C6SBEPA-130 strut blade strut blade not included) which is stepped down to accept .125
(1/8") bore propellers, and is counter-bored for .130 diameter flex cable. It comes
with 18" .130 diameter flex cable & matching teflon tubing,OC4D(drive dog),OC4PN
(prop tail nut) and a nylon washer |
9.95 |
|
BEARING EXTENDERS |
| OC11BE |
BEARING EXTENDER, presses into
struts or strudders bored 11/3211 to extend bearing 1/2" further out |
1.45 |
|
TILLER ARMS |
|
TILLER ARMS, FIT 3/16.1 DIA.
SHAFT, MOLDED NYLONF PLUS NUT AND BOLT(one per package): please specify TA-1
(for flat blade)
or TA-2 (for wedge blade)
NOTE: the TA-2 are used on the all the strudder and wedge rudder assemblies with
an extruded aluminim rudder blade. |
1.15 |
| TA-3 |
BRASS TILLER ARMS FOR
3116" DIA. SHAFT (one piece) with set screw |
5.65 |
|
MISCELLEANOUS |
|
ANTENNA MOUNT |
2.10 |
|
ANTENNA MOUNT II (can be
mounted on deck or stern ) (see illustration ) |
2.50 |
| OC9100 |
COWL LATCHES plastic -package
of 2 with mounting screws |
4.50 |
| OC9200 |
AUTO BAILER imported - (see
illustration) |
6.95 |
|
WATERPROOF BOX SEALS(ALSO KNOWN
AS PUSH-RODS SEALS) (BRU-LINE) |
2.99 |
|
FINS |
| OC4FIN |
FIN BLADE precision cast
beryllium copper (SEE ILLUSTRATION) |
9.95 |
| OCSKFIN |
with bracket - cast beryllium
copper skid fin for deep vees, and monos, blade is held in bracket with a single bolt to
allow it to kick up on impact, or to allow it to be swung safely out of the way when
transporting |
24.50 |
| OCSKFINA |
same as above but cast in
aluminum |
24.50 |
| OCSKFIN |
B/0 skid fin blade only (no
mounting bracket ) in beryllium copper (SEE ILLUSTRATION ) |
14.75 |
| OCSKFIN-A |
B/0 skid fin blade only ( no
mounting bracket ) in aluminum |
14.75 |
